Here is a DIY project with recycled material!
Last month, we celebrated my son’s 4th birthday. As kids start to enjoy crafting at this age, each kid received a birdhouse to decorate and bring home as a gift.
I’ve always enjoyed decorating children’s rooms with birdhouses; if you have a closer look at my projects, you will often see a small birdhouse somewhere. It gives the wall more life and volume. Also, I find them much more joyful than birdcages, which always sadden me a little.
The birdhouses are super easy to do; all you need is:
– cardboard boxes (not too thick)
– some nice paper sheets (you can use Japanese origami paper or any paper not to thick that you like and want to recycle; sometimes I simply print patterns on my laser printer on a 80gr paper)
– some white glue and pencils
– scissors, a cutter, a ruler, set square, strong glue
– ideally a circular cutter for the house door, or a compass + cutter if you don’t have one
STEP 1, traces
Here is the pattern to draw on your cardboard
– Once you have drawn and cut the first house, just use the outline of the pattern to cut the other houses , it will save you a lot of time
– This version is without bottom, but if you add one, you can use the cage as a goody bag.
STEP 2, cutting:
– Cut the outline of the base and the roof,
– And then cut the circular opening with your circular compass .
STEP 3, folding and assembly
– To have a clean folding, run the box cutter on the folding lines (green lines in the figure) . Be careful not to cut through the cardboard, just cut the upper layer.
– Assemble the house, roof and base with the glue .
STEP 4, decoration:
This is where your little ones get involved !
– Apply white glue on the surface you are decorating, stick the piece of decorative paper and apply more glue on top to both fix and polish it.
– Repeat this step to cover the whole house with different decorative papers
– Apply a final layer of glue to secure the assembly.
– I noticed that it was easier for children to have small pieces of pre-cut decorative papers.
– You can of course change the dimensions and proportions of the cabin, but always make sure the roof is 1 to 2 cm wider than the walls of the birdhouse for a nicer effect.
– To hang it on the wall, do a small hole on the back to insert a screw or simply use double-faced adhesive tape/velcro.
STEP 5, the perch
– Make a hole (size of a straw) under the opening with a sharp knife or cutter
– Cut a piece of straw and insert it in the hole.